Pair of Verner Panton Cone Chairs
About the Item
- Creator:Verner Panton (Designer),Fritz Hansen (Manufacturer)
- Design:Cone ChairCone Series
- Dimensions:Height: 35 in (88.9 cm)Diameter: 21.5 in (54.61 cm)Seat Height: 17 in (43.18 cm)
- Sold As:Set of 2
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:circa 1962
- Condition:Minor fading. Purple chair has some sun-bleaching, but otherwise, fabric is in great condition. Cushions have hardened with age.
- Seller Location:Brooklyn, NY
- Reference Number:1stDibs: LU80022819912
Cone Chair
Simple geometric shapes don’t often cause seismic shifts in furniture design. The bold Cone chair, conceived by mid-century Danish architect and designer Verner Panton (1926–98), however, brought about just such a transformation.
After graduating from Copenhagen’s Royal Danish Academy of Fine Arts in 1951, Panton secured a mentorship in the office of renowned architect Arne Jacobsen. There, he contributed to the development of Jacobsen’s revolutionary Ant chair. Slender, lightweight and stackable, with a one-piece laminated-veneer seat that rested on three plastic legs, the 1952 design mirrored the elegant form of its insect namesake. The Ant chair had a significant effect on Panton, who went on to explore the possibilities of Plexiglas and synthetics, rather than working in the solid teak and oak that occupied his contemporaries.
The influence of Jacobsen’s work is evident in Panton’s Cone chair, which he debuted at his father’s restaurant in southern Denmark in 1958, six years after leaving the architect’s office. The designer was revamping the eatery, and the chair — with its artful, pod-like shell set upon a stainless-steel swivel base and its comfortable seat upholstered in soft red fabric to comfort hungry diners — was a key element in his (typically radiant) overhauled interiors.
Panton’s renovation dazzled reporters and patrons, including entrepreneur Percy von Halling-Koch, who created a company to produce the Cone chair. Its unusual form — an inverted cone seeming to balance on its point — caused a sensation in Denmark and beyond. Displayed in a Manhattan store window, the chair incited such a furor on the city’s crowded streets that the police had the shop owners remove it from public view.
Today, Verner Panton's Cone chair is manufactured by Swiss furniture company Vitra and continues to delight design connoisseurs.
Verner Panton
Verner Panton introduced the word “groovy” — or at least its Danish equivalent — into the Scandinavian modern design lexicon. He developed fantastical, futuristic forms and embraced bright colors and new materials such as plastic, fabric-covered polyurethane foam and steel-wire framing for the creation of his chairs, sofas, floor lamps and other furnishings. And Panton’s ebullient Pop art sensibility made him an international design star of the 1960s and ’70s. This radical departure from classic Danish modernism, however, actually stemmed from his training under the greats of that design style.
Born on the largely rural Danish island of Funen, Panton studied architecture and engineering at Copenhagen’s Royal Danish Academy of Fine Arts, where the lighting designer Poul Henningsen was one of his teachers. After graduating, in 1951, Panton worked in the architectural office of Arne Jacobsen, and he became a close friend of Hans Wegner's.
Henningsen taught a scientific approach to design; Jacobsen was forever researching new materials; and Wegner, the leader in modern furniture design using traditional woodworking and joinery, encouraged experimental form.
Panton opened his own design office in 1955, issuing tubular steel chairs with woven seating. His iconoclastic aesthetic was announced with his 1958 Cone chair, modified a year later as the Heart Cone chair. Made of upholstered sheet metal and with a conical base in place of legs, the design shocked visitors to a furniture trade show in Copenhagen.
Panton went on to successive bravura technical feats. His curving, stackable Panton chair, his most popular design, was the first chair to be made from a single piece of molded plastic.
Panton had been experimenting with ideas for chairs made of a single material since the late 1950s. He debuted his plastic seat for the public in the design magazine Mobilia in 1967 and then at the 1968 Cologne Furniture Fair. The designer’s S-Chair models 275 and 276, manufactured during the mid-1960s by August Sommer and distributed by the bentwood specialists at Gebrüder Thonet, were the first legless chairs crafted from a single piece of plywood.
Panton would spend the latter half of the 1960s and early ’70s developing all-encompassing room environments composed of sinuous and fluid-formed modular seating made of foam and metal wire. He also created a series of remarkable lighting designs, most notably his Fun chandeliers — introduced in 1964 and composed of scores of shimmering capiz-shell disks — and the Space Age VP Globe pendant light of 1969.
Panton’s designs are made to stand out and put an eye-catching exclamation point on even the most modern decor.
Find vintage Verner Panton chairs, magazine racks, rugs, table lamps and other furniture on 1stDibs.
- ShippingRetrieving quote...Ships From: Brooklyn, NY
- Return PolicyThis item cannot be returned.
- Edward Wormley for Dunbar, Swiveling StoolBy Dunbar Furniture, Edward WormleyLocated in Brooklyn, NYThis sweet early Wormley modern design makes a perfect vanity or desk chair. The fully upholstered seat swivels over dark stained mahogany legs joined by dowel stretches, with capped...Category
Vintage 1940s American Mid-Century Modern Chairs
MaterialsBrass
- Pair Canary Yellow Suede Swiveling Lounge ChairsBy Milo BaughmanLocated in Brooklyn, NYFun Pop yellow suede tub chairs on swivel base. The original upholstery in very clean with plush stuffing. The seat and tufted back cushions are loose. Un...Category
Vintage 1960s American Mid-Century Modern Swivel Chairs
MaterialsSuede
- Pair of Edmond Spence Mexican 'Yucatan" ChairsBy Edmond J. SpenceLocated in Brooklyn, NYSolid mahogany frame with original hand-rolled grass rushing. American designed, Mexican made chairs incorporated a lavish, exotic south-American Fantasia for the American market.Category
Vintage 1950s Mexican Mid-Century Modern Chairs
MaterialsRush, Mahogany
- Pair Harvey Probber Model 915 ChairBy Harvey ProbberLocated in Brooklyn, NYElegant pair of lounge chairs in bleached mahogany with caned sides. The tapered and tailored design easily works in both traditional and ultra-modern interiors.Category
Vintage 1950s American Mid-Century Modern Side Chairs
MaterialsCane, Mahogany
- Set of Four Chairs by Ejvind A. Johansson for FDB MoblerBy Ejvind A. JohanssonLocated in Brooklyn, NYFour ebonized wood side chairs with bentwood cutout back. Stamped to underside.Category
Vintage 1950s Side Chairs
MaterialsWood
- Nice Pair of Ole Wanscher Rosewood Armchairs for AJ IversenBy A. J. Iversen, Ole WanscherLocated in Brooklyn, NYWith original leather seats, circa 1961. This model was presented at The Copenhagen Cabinetmakers' Guild Exhibition at Designmuseum Danmark, 1961. They were described as “.. an extre...Category
Vintage 1960s Danish Mid-Century Modern Armchairs
MaterialsRosewood, Leather
- Vintage Cone Chair, Verner Panton StyleBy Verner PantonLocated in Miami, FLVintage cone chair on wheels in the style or by Verner Panton. Upholstered in green fabric.Category
Vintage 1950s Danish Mid-Century Modern Swivel Chairs
MaterialsAluminum, Steel
- Pair Vintage Mid-Century Modern Red Cone Chairs Verner Panton for Fritz HansenBy Fritz Hansen, Verner PantonLocated in Topeka, KSMagnificent vintage mid-century modern pair of red Cone chairs by Verner Panton for Fritz Hansen comprised of red hopsacking covered bent sheet metal frames, loose round seat cushions, and 4 prong swivel chrome bases with black glides. This piece has been attributed based upon archived research including online sources, vintage documentation and catalogs, designer literature, and other materials. Beautiful condition, keeping in mind that these are vintage and not new so will have signs of use and wear. We have found no outstanding flaws. Please see photos and zoom in for details. We attempt to portray any imperfections. Circa, 1970-1980’s. MY. OH. MY…. What have we HERE??? This is a phenomenal pair of iconic “Cone Chairs” by Verner Panton for Fritz Hansen!!! The Cone chair was originally designed by Verner Panton in Denmark in 1957. As the name suggests, the body of the chair takes the form of a cone. Standing on its tip, a semi-circular padded shell extends upwards to form the back and armrests, thereby creating a very comfortable and eye appealing armchair. This pair is comprised of fabric covered sheet metal frames bent into a cone shape, gorgeous bright red hopsacking with white stitching, a loose round seat cushion, and a flat 4-prong chrome base with swivel feature and black glides. If you remove the round seat you can view inside the cone base. An original set of red cone chairs much like ours debut in Verner Panton’s father’s restaurant called “Kom Igen” (meaning: Come Again in Danish) in 1958. How COOL is that?? And a fun little history fact on the Cone chair is that it was originally manufactured by Percy Von Halling-Koch who founded the company “Plus Linje” specifically to produce the Cone chair. In the 70’s, they were manufactured by Fritz Hansen, until 2004 when Swiss manufacturer “Vitra” took over… and they still produce them today. Ours are definitely vintage and throughout our extensive research we believe they were made in the Fritz Hansen era. In a statement made by Verner Panton’s friend Niels-Jorgan Kaiser, he explains the design of the Cone chair as “a ballet dancer standing on her toes and easily turning pirouettes’, supported by a flat four-star base.” His genius to use the geometric form and outstanding bright colors were beyond his time, which was a breakthrough in the history of chair design. And his designs are still classic. They are mid-century modern in style with an Atomic or Mod flair, although they are made in Denmark… so they also have a bit of Scandinavian SASS, and they are sure to make a statement in any room of your home. They would be FABULOUS in a game room, at the counter of your indoor bar...Category
20th Century Danish Mid-Century Modern Swivel Chairs
MaterialsSheet Metal
- Original K1 Cone Chairs Design Blue Red by Verner Panton, Denmark, 1950sBy Verner PantonLocated in Vienna, ATOriginal K1 cone chairs design blue red by Verner Panton, Denmark 1950s. They are wearing its original woven fabric in very good and comfortable original condition. The chairs are ba...Category
Vintage 1950s Danish Mid-Century Modern Chairs
MaterialsMetal
- Verner Panton "Wire Cone" ChairBy Verner PantonLocated in Los Angeles, CAVerner Panton "Wire Cone" chair designed in 1958 and produced by Plus-Linje. I have three of these chairs.Category
Vintage 1950s Danish Scandinavian Modern Swivel Chairs
MaterialsMetal
- Verner Panton, Set of Four "A" Chairs "System 1-2-3" for Fritz Hansen, 1970sBy Verner Panton, Fritz HansenLocated in Paris, FRPanton's "System 1-2-3" utilises a cantilevered form. This seating was developed as a multi-functional set. Indeed, the chairs could be linked to form a bench and a variety of option...Category
Vintage 1970s Danish Scandinavian Modern Chairs
MaterialsSteel
- Verner Panton Cone ChairBy Verner PantonLocated in Edmonton, ABThis iconic chair is in good vintage condition with minor wear consistent with age and use. Steel frame and vinyl upholstery. Designed by Verner Panton in 1958.Category
Vintage 1950s Danish Mid-Century Modern Chairs
MaterialsAluminum, Stainless Steel
Recently Viewed
View AllRead More
113 Chairs That Prove Danish Design Isn’t Limited to Denmark
In an innovative display, the Designmuseum Danmark is permanently exhibiting the 20th century's most iconic seats.
Verner Panton’s Bold Designs From the 1960s and ’70s Are Showing Up Everywhere
From high-fashion runways to a brand-new book, the groovy, futurist work of this groundbreaking Danish creative is receiving newfound — and much deserved — attention.