Dining set by Bruno Mathsson, Piet Hein and Arne Jacobsen for Fritz Hansen
About the Item
- Creator:
- Design:
- Dimensions:Height: 70 in (177.8 cm)Width: 135 in (342.9 cm)Depth: 90 in (228.6 cm)
- Sold As:Set of 5
- Style:Scandinavian Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1950s
- Condition:Wear consistent with age and use.
- Seller Location:Stockholm, SE
- Reference Number:1stDibs: LU1006618608862
Series 7 Chair
The celebrated Model 3107, or Series 7, chair showcases Arne Jacobsen’s (1902–71) trademark understatement and interplay between form and functionality. Part of a seductive foray into minimalism for the modernist Danish architect and designer, the Series 7’s seat and backrest were produced from a single piece of bent plywood in 1955 for manufacturer Fritz Hansen.
The lean, stackable chair updates Jacobsen’s simple and spare 1952 Ant chair to a broader base while retaining its revolutionary construction (also a one-piece seat and back) and adding an extra leg. It was a thoroughly modern design inspired in equal parts by the Danish cabinetmaking tradition that preceded Jacobsen as well as the gentle and organic forms that typified Scandinavian modernist furniture. The chair was also a technical advancement of Charles and Ray Eames’ innovative plywood molding techniques.
Trained as a mason and then an architect, Jacobsen assisted in Copenhagen's City Architect's Office after graduating from the Royal Danish Academy of Fine Arts in 1927, where he eventually became a professor. He set up his own design practice in 1930 and produced large-scale projects such as the Bellavista housing estate, a revered work of Bauhaus-style architecture situated north of Copenhagen in Klampenborg.
In 1960, Jacobsen completed his architectural work on the 22-story SAS Royal Hotel and Air Terminal in Denmark’s capital city, but, as he preferred to be involved thoroughly in such commissions, he designed the interiors as well as every other possible detail for the accommodation property, from lighting to textiles to furniture. A diverse designer with a world-famous work ethic, Jacobsen also created modern light fixtures, bathroom fittings, cutlery and metalware — a 1957 set of flatware he designed for A. Michelsen was featured in Stanley Kubrick’s 2001: A Space Odyssey.
Jacobsen was one of the most successful and accomplished Danish designers of the 20th century. Along with the Ant and massively successful Series 7, his Swan and Egg chairs, produced in 1958 for the SAS hotel, are definitive exports and exemplify Danish modern’s marriage of quality materials, simplicity and thoughtful form.
The Series 7 has remained in production since 1955 at Fritz Hansen, where carpenters carefully select and cut sheets of veneer by hand in order to maintain the chair’s classic shape. It remains among Jacobsen’s most simple and pared-down chairs, and while each model is made of pressure-molded sliced veneer, the Series 7 is available in varying veneers and finishes. It is the most sold chair in the manufacturer’s history.
Arne Jacobsen
The eye-catching work of the Danish architect and designer Arne Jacobsen often introduces new collectors to mid-20th century furniture. With their fluid lines and sculptural presence, Jacobsen’s signature pieces — the elegant Swan chair and the cozy-yet-cutting edge Egg chair, both first presented in 1958 — are iconic representations of both the striking aesthetic of the designers of the era and their concomitant attention to practicality and comfort. Jacobsen designed furniture that had both gravitas and groove.
Though Jacobsen is a paragon of Danish modernism, his approach to design was the least “Danish” of those who are counted as his peers. The designs of Hans Wegner, Finn Juhl, Børge Mogensen and others grew out of their studies as cabinetmakers. They prized skilled craftsmanship and their primary material was carved, turned and joined wood. Jacobsen was first and foremost an architect, and while he shared his colleagues’ devotion to quality of construction, he was far more open to other materials such as metal and fiberglass.
Many of Jacobsen’s best-known pieces had their origin in architectural commissions. His molded-plywood, three-legged Ant chair (1952) was first designed for the cafeteria of a pharmaceutical company headquarters. The tall-backed Oxford chair was made for the use of dons at St. Catherine’s College, Oxford, whose Jacobsen-designed campus opened in 1962 (while still under construction). The Swan, Egg and Drop chairs and the AJ desk lamp were all created as part of Jacobsen’s plan for the SAS Royal Copenhagen Hotel, which opened in 1960. (The hotel has since been redecorated, but one guest room has been preserved with all-Jacobsen accoutrements.)
To Jacobsen’s mind, the chief merit of any design was practicality. He designed the first stainless-steel cutlery set made by the Danish silver company Georg Jensen; Jacobsen’s best-selling chair — the plywood Series 7 — was created to provide lightweight, stackable seating for modern eat-in kitchens. But as you will see from the objects on 1stDibs, style never took a backseat to function in Arne Jacobsen’s work. His work merits a place in any modern design collection.
Find authentic Arne Jacobsen chairs, tables, sofas and other furniture on 1stDibs.
- ShippingRetrieving quote...Ships From: Stockholm, Sweden
- Return PolicyA return for this item may be initiated within 2 days of delivery.
- Occasional Table “Superellips” Designed by Bruno Mathsson and Piet HeinBy Bruno MathssonLocated in Stockholm, SEOccasional table “Superellips” designed by Bruno Mathsson and Piet Hein for Mathsson International, Sweden, 1960’s Root veneer top and beech legs. Very rare model. Measurements: L...Category
Mid-20th Century Swedish Mid-Century Modern Coffee and Cocktail Tables
MaterialsBeech
- Armchair “Egg Chair” Designed by Arne Jacobsen for Fritz Hansen, Denmark, 1958By Arne Jacobsen, Fritz HansenLocated in Stockholm, SEArmchair “Egg chair” designed by Arne Jacobsen for Fritz Hansen, Denmark. 1958. Original leather and aluminium. Very early model with the built up seat, without separate cushion. ...Category
Vintage 1950s Swedish Scandinavian Modern Swivel Chairs
MaterialsSteel
- Coffee Table Designed by Arne Jacobsen for Fritz Hansen, Denmark, 1950sBy Arne JacobsenLocated in Stockholm, SECoffee table designed by Arne Jacobsen for Fritz Hansen, Denmark. 1950s. Rare bronze version. Bronze and rosewood. H: 47 cm/ 18 1/2'' L: 120 cm/ 47 1/4'' D: 55 cm/ 21 1/2''Category
Vintage 1950s Danish Scandinavian Modern Coffee and Cocktail Tables
MaterialsBronze
- Occasional Table Annika Designed by Bruno Mathsson for Karl Mathsson, SwedenBy Bruno MathssonLocated in Stockholm, SEOccasional table Annika designed by Bruno Mathsson for Karl Mathsson, Sweden. 1973. Birch and Karelian birch. Dimensions: H: 42 cm / 1' 4" D: 65 cm / 2' 1''Category
Vintage 1970s Swedish Scandinavian Modern Tables
MaterialsBirch
- Table Annika Designed by Bruno Mathsson for Karl Mathsson, Sweden, 1936By Bruno MathssonLocated in Stockholm, SETable Annika designed by Bruno Mathsson for Karl Mathsson, Sweden. 1936. Elm top and birch legs. Measurements: H: 65 cm / 2' 2" D: 95 cm / 3' 1 7/8" This round “Annika” occasional table was manufactured in 1967 and designed in 1936; it is made of birch with a smooth Oregon pine top. Bruno Mathsson created various iterations of his “Annika” model — they come in three shapes with different wood combinations and various heights. They can be round with three legs, square with four legs, or rectangular with six legs, allowing exciting and contrasting combinations when grouped. While the design aesthetic is delicate, the table is very well-made because of the strong plywood. Bruno Mathsson’s love for nature pervades all his designs — he frequently slept outside in the forest or his garden on a specially designed foldable bed. His furniture shapes, particularly the legs, bring bull's horns or insects to mind. Mathsson was one of the most important Swedish designers of the 20th century. He was a contemporary of Alvar Aalto and Marcel Breuer, all of whom had already experimented with bent plywood during the 1930s. Karl Mathsson, Bruno Mathsson's father, was the fifth generation in a family of master cabinet makers. He owned a furniture manufacturing company that produced the earlier pieces; later, they founded "Mathsson International”. The stamp indicates the manufacturing date and, sometimes, the design date. Bruno Mathsson often gave his furniture Swedish woman...Category
Vintage 1930s Swedish Scandinavian Modern Side Tables
MaterialsBirch, Elm
- Shelving Systems Designed by Bruno Mathsson for Mathsson InternationalBy Bruno MathssonLocated in Stockholm, SEShelving systems designed by Bruno Mathsson for Mathsson International, Sweden, 1960s. Pine and lacquered wood. Measu...Category
Mid-20th Century Swedish Mid-Century Modern Shelves
MaterialsWood, Pine, Lacquer
- Walnut Dining Set by Piet Hein, Bruno Mathsson & Arne Jacobsen for Fritz HansenBy Arne Jacobsen, Fritz Hansen, Piet Hein, Bruno MathssonLocated in Antwerpen, VANBeautiful Danish Fritz Hansen dining set in walnut: a ‘Super-Elliptical’ dining table designed by Piet Hein & Bruno Mathsson and in 2005 (labeled). This example features a beautiful top made of walnut with a magnificent wood grain, combined with the signature chromed steel spanlegs. Together with a matching set of 4 walnut ‘Series 7...Category
Mid-20th Century Danish Scandinavian Modern Dining Room Sets
MaterialsMetal
- 1980s Rectangular Dining Table by Piet Hein, Bruno Mathsson and Arne JacobsenBy Arne Jacobsen, Fritz Hansen, Piet Hein, Bruno MathssonLocated in Praha, CZ- Newly veneered in Ziricote wood - Completely refurbished.Category
Vintage 1980s Danish Industrial Dining Room Tables
MaterialsWood
- Superellipse Table by Bruno Mathsson and Piet Hein for Fritz HansenBy Fritz Hansen, Piet Hein, Bruno MathssonLocated in RADOMSKO, PLIntroducing the collaborative masterpiece by Bruno Mathsson and Piet Hein: the Scandinavian Modern Superelips Dining Table. Manufactured by Fritz Hansen in Denmark, it boasts an attr...Category
1990s Danish Scandinavian Modern Dining Room Tables
MaterialsMetal, Chrome
- Large Superellipse Dining Table by Bruno Mathsson and Piet Hein for Fritz HansenBy Fritz Hansen, Piet Hein, Bruno MathssonLocated in RADOMSKO, PLIntroducing the collaborative masterpiece by Bruno Mathsson and Piet Hein: the Scandinavian Modern Superelips Dining Table. Manufactured by Fritz Hansen in Denmark, it boasts an attr...Category
1990s Danish Scandinavian Modern Dining Room Tables
MaterialsMetal, Chrome
- Super Elipse Dining Table by Piet Hein & Bruno Mathsson for Fritz HansenBy Piet Hein, Bruno Mathsson, Fritz HansenLocated in Los Angeles, CASuper Ellipse round dining or center table by Piet Hein & Bruno Mathsson for Fritz Hansen. In original condition with visible scuffing to the lacquer on the legs as well as visible w...Category
Vintage 1950s Dutch Mid-Century Modern Dining Room Tables
MaterialsLacquer
- Arne Jacobsen & Piet Hein Wood Dining Table Mid-Century Modern Fritz HansenBy Arne Jacobsen, Fritz Hansen, Piet HeinLocated in West Palm Beach, FLLarge Arne Jacobsen & Piet Hein dining table. Wood has scratches and chipping, but adds to its pleasant patina. Fits 6 dining chairs.Category
20th Century Danish Dining Room Tables
MaterialsMetal
Recently Viewed
View AllRead More
The 21 Most Popular Mid-Century Modern Chairs
You know the designs, now get the stories about how they came to be.
What Makes Scandinavian Modernism and Nordic Design So Irresistible?
Andrew Duncanson, founder of the Stockholm- and London-based gallery Modernity, weighs in on the masters of mid-century furniture and decorative arts.