USA Mid-Century Red Cushion N Steel Diamond Armchairs by Bertoia for Knoll, 1970
About the Item
- Creator:Harry Bertoia (Designer),Knoll (Designer)
- Design:
- Dimensions:Height: 29.53 in (75 cm)Width: 33.47 in (85 cm)Depth: 28.75 in (73 cm)Seat Height: 17.92 in (45.5 cm)
- Sold As:Set of 4
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:circa 1970
- Condition:Minor losses. Minor fading.
- Seller Location:MIlano, IT
- Reference Number:1stDibs: LU4860226515142
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American mid-century modernism. Among furniture aficionados, Bertoia is known for his chairs such as the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952.
As an artist, he is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America.
At Cranbrook, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at the school, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became and remain perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass.
As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
Find vintage Harry Bertoia sculptures, armchairs, benches and other furniture and art on 1stDibs.
- ShippingRetrieving quote...Ships From: Milan, Italy
- Return PolicyA return for this item may be initiated within 14 days of delivery.
- Mid-Century Red Cushion and Steel Diamond Armchair by Bertoia for Knoll, 1970sBy Knoll, Harry BertoiaLocated in MIlano, ITUSA mid-century Red cushion and steel Diamond armchair by Bertoia for Knoll, 1970s. Diamond armchair with structure in welded steel rods with polished chrome plating. The red cushio...Category
Vintage 1970s American Mid-Century Modern Chairs
MaterialsSteel
- American modern metal and red fabric chairs by Warren Platner for Knoll, 1970sBy Knoll, Warren PlatnerLocated in MIlano, ITAmerican modern metal and red fabric chairs by Warren Platner for Knoll, 1970s Cockpit chairs with a round base. The structure follows curved and rounded lines and makes up the backr...Category
Vintage 1970s American Modern Chairs
MaterialsMetal
- Italian modern steel and fabric Movie chair Mario Marenco, Poltrona Frau, 1970sBy Paltrona Frau, Mario MarencoLocated in MIlano, ITItalian modern matt steel and yellow velvet stackable Movie chair with armrest by Mario Marenco for Poltrona Frau, 1970s. Stackable chair, with armrests, ...Category
Vintage 1970s Italian Modern Chairs
MaterialsSteel
- American Midcentury Black White Metal High Stools by Bertoia for Knoll, 1960sBy Harry Bertoia, KnollLocated in MIlano, ITAmerican mid-century Black and white metal High stools by Harry Bertoia for Knoll, 1960s Set of 4 high bar stools with seat and back made of a white ...Category
Vintage 1960s American Mid-Century Modern Stools
MaterialsMetal
- Italian MidCentury Brown Leather Steel Chairs by Tatlin Nikol International 1950By Vladimir TatlinLocated in MIlano, ITItalian mid-century brown leather steel chairs by Tatlin for Nikol International, 1950s Set of 4 chairs with chromed steel tubular structure. The ...Category
Vintage 1950s Italian Mid-Century Modern Chairs
MaterialsSteel
- Usa Mid Century Black Wood and Faux Leather Chairs by Knoll, 1960Located in MIlano, ITUSA Mid-Century Modern set of solid beech matt black wood and black faux leather chairs by Knoll, 1960s Chairs with armrests with structure i...Category
Vintage 1960s American Mid-Century Modern Chairs
MaterialsFaux Leather, Wood
- Harry Bertoia "Diamond" Lounge Chair for Knoll, USA, 1980sBy Knoll, Harry BertoiaLocated in Hellouw, NLA diamond lounge chair by Harry Bertoia for Knoll with Kvadrat Fabric from the USA. This chair is probably produced in the 1980s and has a black frame with a fully covered seating ar...Category
Vintage 1950s American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Mid-Century Large Knoll Diamond Bertoia Lounge - SingleBy Harry Bertoia, KnollLocated in Raleigh, NC1960’s Large Knoll Diamond bertoia lounge designed by Harry Bertoia. Very comfy with rubber pads allowing this lounge to flex for comfort. Bertoia ...Category
Vintage 1960s American Mid-Century Modern Chairs
MaterialsMetal, Chrome
- Pair Mid Century Harry Bertoia Knoll Diamond ChairsBy Knoll, Harry BertoiaLocated in Baltimore, MDA beautiful pair of vintage, knoll, metal mid century, Harry Bertoia, Diamond Chairs. Nice early Harry Bertoia Diamond Chairs for Knoll. A vintage iconic pair designed by Harry Bertoia manufactured by Knoll features original yellow, removable, vinyl, covered wool and metal frames. Chairs can be used with or without fabric, manufactured early label, on underside with knoll’s 320 Park Avenue address, which housed their offices from 1961 to 1970. The pair dates to the early 1960’s. The diamond chair is an astounding study in space, form and function by one of the master sculptors of the last century. Harry Bertoia’s wire chairs...Category
Vintage 1960s American Mid-Century Modern Chairs
MaterialsMetal
- Diamond Chairs by Harry Bertoia for Knoll InternationalBy Knoll, Harry BertoiaLocated in Brussels, BEDiamond chairs by Harry Bertoia for Knoll International, 6 available Sold par piece 1200€.Category
Vintage 1970s European Armchairs
MaterialsChrome
- Chair Armchair Harry Bertoia for Knoll Black Metal Midcentury United States 1970By Knoll, Harry BertoiaLocated in Palermo, ITChair or armchair designed by the designer Harry Bertoia and produced in the United States in the 70s by Knoll international. The sculptural armchair/chair was made of black enamelle...Category
Mid-20th Century Italian Mid-Century Modern Chairs
MaterialsMetal
- 6 Bertoia for Knoll White Metal "Diamond" ChairsBy Knoll, Harry BertoiaLocated in Los Angeles, CAHarry Bertoia (Italian/American, 1915-1978) for Knoll "Diamond" chair in newly powder coated white metal with an authentic yellow or grey exterior seat cushions. Design circa 1952. ...Category
1990s American Mid-Century Modern Chairs
MaterialsSteel