1st Edition Wire Cone Chair Model 'K2' by Verner Panton for Plus Linje
About the Item
- Creator:Verner Panton (Designer),Plus Linje (Manufacturer)
- Design:
- Dimensions:Height: 29.73 in (75.5 cm)Width: 25.2 in (64 cm)Depth: 23.63 in (60 cm)Seat Height: 14.97 in (38 cm)
- Style:Scandinavian Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:circa 1958
- Condition:Wear consistent with age and use.
- Seller Location:Little Burstead, GB
- Reference Number:1stDibs: LU2100313108171
Verner Panton
Verner Panton introduced the word “groovy” — or at least its Danish equivalent — into the Scandinavian modern design lexicon. He developed fantastical, futuristic forms and embraced bright colors and new materials such as plastic, fabric-covered polyurethane foam and steel-wire framing for the creation of his chairs, sofas, floor lamps and other furnishings. And Panton’s ebullient Pop art sensibility made him an international design star of the 1960s and ’70s. This radical departure from classic Danish modernism, however, actually stemmed from his training under the greats of that design style.
Born on the largely rural Danish island of Funen, Panton studied architecture and engineering at Copenhagen’s Royal Danish Academy of Fine Arts, where the lighting designer Poul Henningsen was one of his teachers. After graduating, in 1951, Panton worked in the architectural office of Arne Jacobsen, and he became a close friend of Hans Wegner's.
Henningsen taught a scientific approach to design; Jacobsen was forever researching new materials; and Wegner, the leader in modern furniture design using traditional woodworking and joinery, encouraged experimental form.
Panton opened his own design office in 1955, issuing tubular steel chairs with woven seating. His iconoclastic aesthetic was announced with his 1958 Cone chair, modified a year later as the Heart Cone chair. Made of upholstered sheet metal and with a conical base in place of legs, the design shocked visitors to a furniture trade show in Copenhagen.
Panton went on to successive bravura technical feats. His curving, stackable Panton chair, his most popular design, was the first chair to be made from a single piece of molded plastic.
Panton had been experimenting with ideas for chairs made of a single material since the late 1950s. He debuted his plastic seat for the public in the design magazine Mobilia in 1967 and then at the 1968 Cologne Furniture Fair. The designer’s S-Chair models 275 and 276, manufactured during the mid-1960s by August Sommer and distributed by the bentwood specialists at Gebrüder Thonet, were the first legless chairs crafted from a single piece of plywood.
Panton would spend the latter half of the 1960s and early ’70s developing all-encompassing room environments composed of sinuous and fluid-formed modular seating made of foam and metal wire. He also created a series of remarkable lighting designs, most notably his Fun chandeliers — introduced in 1964 and composed of scores of shimmering capiz-shell disks — and the Space Age VP Globe pendant light of 1969.
Panton’s designs are made to stand out and put an eye-catching exclamation point on even the most modern decor.
Find vintage Verner Panton chairs, magazine racks, rugs, table lamps and other furniture on 1stDibs.
- ShippingRetrieving quote...Ships From: Little Burstead, United Kingdom
- Return PolicyA return for this item may be initiated within 7 days of delivery.
- Cigar Chair Model GE240 by Hans J Wegner for GetamaBy Hans J. Wegner, GETAMALocated in Little Burstead, EssexA very nice example of this classic chair, freshly uphosltered in Mocha coloured Boucle fabric. The frame in Oak and all in great condition.Category
Mid-20th Century Danish Scandinavian Modern Lounge Chairs
MaterialsFabric, Oak
- Pair of 'Plank' Chairs Model GE290 by Hans Wegner for GetamaBy Hans J. Wegner, GETAMALocated in Little Burstead, EssexThese are in excellent original condition, the cushions retain their spring upholstery and recovered in Abraham Moon wool fabric in Fern Green, overall a great pair of classic mid-ce...Category
Mid-20th Century Danish Scandinavian Modern Lounge Chairs
MaterialsFabric, Oak
- Finn Juhl for Soren Willadsen Model SW96 Lounge ChairBy Soren Willadsen Mobelfabrik, Finn JuhlLocated in Little Burstead, EssexThis is a really beautiful original example of this scarce lounge chair, designd by Finn Juhl and produced by Soren Willadsen. The frame of the chair is Oak, the arms are Teak and th...Category
Mid-20th Century Danish Scandinavian Modern Lounge Chairs
MaterialsCane, Oak, Teak
- Danish Santos Rosewood Model 56 Armchair by Grete Jalk for Poul JeppesenBy Grete Jalk, Poul Jeppesens MøbelfabrikLocated in Little Burstead, EssexA very good example of this high quality lounge chair by Grete Jalk for Poul Jeppesen, in finely marked solid Santos Rosewood, or Machaerium Scleroxylon, a sustainable timber, hence ...Category
Mid-20th Century Danish Scandinavian Modern Lounge Chairs
MaterialsHardwood
- 5 Pieces of Mira x Fabric by Verner Panton, and One Piece of 70's FabricBy Mira-X, Verner PantonLocated in Little Burstead, EssexWe have 2 pieces of Green Velour Squares by Panton for Mira X formerly curtains some fading on one and a split on the other as per photos. Two pieces of Blue Purple and Red squares, ...Category
Vintage 1970s Swiss Mid-Century Modern Curtains and Valances
MaterialsFabric
- Pair of 'Swoon' Chairs by Space Copenhagen for FredericiaBy Fredericia, Space CopenhagenLocated in Little Burstead, EssexWe have 2 pairs of these very cool Danish designed Lounge chairs in light grey original fabric in great condition, no wear or stains. They are on solid Oak legs which are demountable...Category
21st Century and Contemporary Danish Scandinavian Modern Lounge Chairs
MaterialsFabric, Oak
- Iconic 'Heart Cone' Chair by Verner Panton for Plus Linje, 1958By Plus-Linje, Verner PantonLocated in Antwerpen, VANIconic ‘Heart Cone’ chair designed by Verner Panton in 1958. This is an original early example produced by Plus Linje in Denmark during the 1950s-60s. This means the foam inside is n...Category
Mid-20th Century Danish Scandinavian Modern Lounge Chairs
MaterialsMetal
- Cone Chair by Verner Panton for Plus LinjeBy Plus-Linje, Verner PantonLocated in Chicago, ILc. 1970s. Reupholstered in speckled fabric, might be Raf Simons Kvadrat. This model has been refoamed as well.Category
Vintage 1970s Danish Mid-Century Modern Chairs
MaterialsFabric
- Rare Verner Panton Wire Cone Chair, Model K2, First Year Production, 1959By Verner PantonLocated in Kansas City, MOThis example is from the first year of production as noted by the rounded feet (later productions feature enlongated black feet). Chair retains original upholstery. Overall example h...Category
Vintage 1950s Danish Mid-Century Modern Lounge Chairs
MaterialsSteel
- Danish Peacock Lounge Chair by Verner Panton for Plus-Linje, 1960sBy Plus-Linje, Verner PantonLocated in ŁÓDŹ, PLThis eye-catching chair was designed by Verner Panton and manufactured by Plus-Linje in 1960-1969 in Denmark. This Scandinavian Modern model consists of a bowl shaped top and a cyli...Category
Vintage 1960s Danish Scandinavian Modern Lounge Chairs
MaterialsChrome
- Verner Panton Peacock Lounge Chair for Plus-Linje Denmark MidcenturyBy Verner Panton, Plus-LinjeLocated in WIJCKEL, NLConsisting of a bowl shaped top and a cylindrical foot made from electrogalvanized stainless steel wire. The two parts are connectable with clips for a floor standing version. The bowl shaped top can be used separately and hung from the ceiling. The chair has 7 removable original seat cushions upholstered in grey woolen fabric. Literature: Cara Greenberg, Op to Pop, New York, 1999, pp. 116 and 126 Alexander von Vegesack, Mathias Remmele, eds. Verner Panton: The Collected Works, exh. cat., Vitra Design Museum, Weil am Rhein, 2000, pp. 9 and 246 Charlotte and Peter Fiell, 60s Decorative Arts, Cologne, 2000, p. 18. A danish designer and architect who lives in Switserland, Verner Panton has worked in many areas and with many manufacturers, providing numerous designs. Verner Panton studied at the Royal Danish Academy in Copenhagen and worked as an associate with Arne Jacobsen. He opened his own design office in 1955 and created the first single-form injection molded plastic chair in 1960, edited by Herman Miller in 1967. He created truly innovative futuristic furniture...Category
Vintage 1960s Danish Scandinavian Modern Lounge Chairs
MaterialsSteel
- Peacock Chair Designed by Verner Panton for Plus Linje, Denmark, 1960By Verner Panton, Habitat International, Plus-LinjeLocated in London, GBDesigned by Verner Panton in 1959 and produced by Plus-Linje in Denmark in 1960, the Peacock chair is a design classic. Consisting of a bowl-shaped top and a cylindrical foot made...Category
Vintage 1960s Danish Space Age Lounge Chairs
MaterialsSteel, Chrome
Recently Viewed
View AllRead More
113 Chairs That Prove Danish Design Isn’t Limited to Denmark
In an innovative display, the Designmuseum Danmark is permanently exhibiting the 20th century's most iconic seats.
Verner Panton’s Bold Designs From the 1960s and ’70s Are Showing Up Everywhere
From high-fashion runways to a brand-new book, the groovy, futurist work of this groundbreaking Danish creative is receiving newfound — and much deserved — attention.