Pair of 670 Lounge Chairs by Charles Eames for Herman Miller
About the Item
- Creator:Charles Eames (Designer)
- Dimensions:Height: 33 in (83.82 cm)Width: 33 in (83.82 cm)Depth: 30 in (76.2 cm)Seat Height: 16 in (40.64 cm)
- Sold As:Set of 2
- Materials and Techniques:
- Period:
- Date of Manufacture:1978
- Condition:Very good original condition with normal patina. Some light fading to rosewood frames. One spot on one seat cushion around a button appears to have been repaired at some point as shown in the photo. Chairs are structurally sound and beautiful.
- Seller Location:Dallas, TX
- Reference Number:1stDibs: LU851831760722
Charles Eames
The legacy of Charles Eames looms large in design. In partnership with his wife, Ray, Charles was at the forefront of pioneering innovation in the use of molded plywood for furniture making. The Eameses’ cheerful and inviting work has endured among the most important advancements in the history of 20th-century design.
Together, visionary mid-century modern duo Charles and Ray Eames introduced a wide range of renowned furniture to the postwar market, including iconic designs such as the Eames lounge chair and ottoman, the wildly colorful birch plywood-and-plastic-laminate Eames storage unit, the Eames compact sofa and more. The designers were trailblazers in molded plywood furniture and brought lively organic form to metal and plastic.
Charles Eames studied architecture at Washington University in St. Louis. He traveled to Mexico and Europe, and experienced firsthand the work of designer-architects Le Corbusier and Ludwig Mies van der Rohe. In 1930, upon returning to Missouri, Eames opened an architecture practice with Charles M. Gray but later moved to Michigan in 1938. He received a fellowship at Cranbrook Academy of Art, which would become a breeding ground for the stars of mid-century design. Eames continued his architecture studies at Cranbrook and also taught in the design department.
In 1940, Eames met his future wife, artist and designer Beatrice Alexandra "Ray" Kaiser, who was studying at Cranbrook under Abstract Expressionist painter Hans Hofmann. Charles teamed up with another Cranbrook instructor, Finnish-American designer Eero Saarinen, to explore the possibilities of plywood for use in furniture design.
With support from Ray, Charles and Eero created chairs and case pieces and submitted them to the “Organic Design in Home Furnishings” competition at the Museum of Modern Art in New York City — among them was the groundbreaking organic Side chair made of molded plywood with maple legs. It was upholstered by Heywood-Wakefield. This exhibition is considered critical by many to the popularization of what is known as mid-century modernism. Eames and Saarinen won first place for their submissions to the competition.
Charles and Ray were married in 1941 and soon after moved to Los Angeles, California, and lived in an apartment building designed by architect Richard Neutra. Charles worked on set design at MGM, and at night, in a humble workshop they established in the guest bedroom, he and Ray experimented with molded plywood on a homemade device they called the “Kazaam!” machine. In 1942, the couple won a U.S. Navy contract to create molded plywood leg splints that would be used to support wartime medical efforts. Soon, the Evans Product Company was making the splints and the Eameses opened the famed Eames Office and studio.
The Eameses’ innovative use of wire framing, molded plywood and applied fabrics caught the attention of many notable figures in interior design and architecture, including George Nelson, director of design at Herman Miller, a now-legendary modern furniture manufacturer. The company enlisted the Eameses’ talents and was eventually home to the couple’s classic pieces such as the Eames DCW chair and the DCM chair.
Find an extensive array of vintage Charles Eames seating, tables and case pieces on 1stDibs.
- ShippingRetrieving quote...Ships From: Dallas, TX
- Return PolicyA return for this item may be initiated within 3 days of delivery.
- Pair of Early Coconut Chairs by George Nelson for Herman Miller in ShearlingBy George NelsonLocated in Dallas, TXA pair of early metal back Coconut chairs designed by George Nelson for Herman Miller. Fully restored and upholstered in shearling.Category
Vintage 1950s Lounge Chairs
MaterialsSheepskin
- Channel Back Lounge Chair by Edward Wormley for DunbarBy Edward WormleyLocated in Dallas, TXAn unusual and early design by Edward Wormley for Dunbar. This channel back lounge chair has mahogany trim and aluminum legs. Fully restored and reupholstered in Designtex / Lambert ...Category
Vintage 1950s Lounge Chairs
MaterialsAluminum
- Lounge Chair by Paul McCobbBy Paul McCobbLocated in Dallas, TXA rare lounge chair designed by Paul McCobb for Directional.Category
Vintage 1950s Lounge Chairs
MaterialsFabric
- Four Dunbar Janus Lounge Chairs by Edward WormleyBy Edward WormleyLocated in Dallas, TXA beautifully restored set of four matching Janus lounge chairs with walnut frames and green velvet upholstery. Designed by Edward Wormley for Dunbar.Category
Vintage 1950s Lounge Chairs
MaterialsVelvet, Walnut
- Pair of Lounge Chairs by Abel Sorensen for KnollBy Abel SorensonLocated in Dallas, TXA pair of early slipper chairs designed by Abel Sorenson for Knoll, 1940's.Category
Vintage 1940s Lounge Chairs
MaterialsBirch
- Pair of Lounge chairs by Paul McCobb for WiddicombBy Paul McCobbLocated in Dallas, TXA pair of lounge chairs designed by Paul McCobb for Widdicomb in 1960-61. Fully restored and reupholstered in Holly Hunt / Teddy / Warm Silver fabric.Category
Vintage 1960s Lounge Chairs
MaterialsBouclé
- Eames Walnut 670 Lounge Chair with Ottoman by Herman MillerBy Charles and Ray EamesLocated in Cincinnati, OHThe classic iconic Eames lounge chair and ottoman with walnut frame, soft black leather upholstered cushions and cast aluminum legs. Retains the manufactures tags to each piece by th...Category
Mid-20th Century American Mid-Century Modern Lounge Chairs
MaterialsAluminum
- Charles Eames Lounge Chairs for Herman MillerBy Charles Eames, Herman MillerLocated in bari, ITSet two lounge chairs model EA 108 designer Charles Eames for Herman Miller production 1960s. Charles Eames began very early in life as a designer to the extent that he was employed, as early as age 14, in the workshops of the Laclede Steel Company. He studied architecture at Washington University in St. Louis. He proposed to his professors the study of the work of Frank Lloyd Wright but, at first dissuaded from his intent, was later expelled from the school on the grounds that-we read in the commentary of one of the professors-"his point of view was too modern." A great influence on him was Finnish architect Eero Saarinen, with whom he shared some professional experiences and became friends. In 1938, at the latter's invitation, he moved to Michigan, where he studied architecture at Cranbrook Academy of Art and later taught there, also becoming head of the Industrial Design department. In 1941 he won, with Eero Saarinen, the competition for MoMA in New York concerning "Organic Design in Home Furnishing." Their work showed a new way of conceiving wooden furniture, experimenting with the use of bentwood plywood, as done a few years earlier by Alvar Aalto. In 1941 he was united in second marriage to Ray Kaiser...Category
Vintage 1980s Mid-Century Modern Chairs
MaterialsAluminum
- Vintage Rosewood Charles Eames 670 Lounge Chair & 671 Ottoman for Herman MillerBy Charles and Ray EamesLocated in Pemberton, NJA very clean example of a vintage modern icon. Charles Eames 670 & 671 Lounge chair and an ottoman produced by Herman Miller. Beautiful striations in...Category
Vintage 1980s American Mid-Century Modern Lounge Chairs
MaterialsLeather, Rosewood
- Charles Eames for Herman Miller 670/671 Lounge Chair and Ottoman, 2021By Charles and Ray EamesLocated in Costa Mesa, CACharles Eames for Herman Miller 670/671 Lounge Chair and Ottoman, 2021. Beautiful near new Charles Eames Lounge chair with ottoman in desirable 2100 series smooth black leather. Ch...Category
2010s American Mid-Century Modern Lounge Chairs
MaterialsLeather, Walnut
- Early Rope Edge Eames Lounge Chair for Herman MillerBy Charles and Ray EamesLocated in Cincinnati, OHA very early 1st generation rope edge rare lounge height fiberglass arm shell chair with the larger rubber shock mounts having metal washers and satin black iron X base. The chair st...Category
Mid-20th Century American Mid-Century Modern Lounge Chairs
MaterialsIron
- Charles and Ray Eames DCW for Herman MillerBy Charles and Ray EamesLocated in Belmont, MADCW by Charles and Ray Eames for Herman Miller in original condition. Legs attached with 5/2/4 screw configuration. Original patina.Category
Vintage 1960s American Mid-Century Modern Chairs
MaterialsPlywood